Aluminum Armchair, Percy

The Aluminum Armchair, Percy goes on the shop list as an upholstered back armchair for fine dining rooms, hotel restaurants, and private dining rooms. The listing keeps it indoors, on the shop floor. Aluminum makes up the frame. Order the seat in fabric or vinyl. Worth knowing at the counter: a load rating of 500 lb, 26 lb to carry from the back room, an arm each side, and a back with padding.

Measure your floor against 23 3/4" W x 24 1/4" D x 35 1/2" H. The listed seat height is 18.5 inches. Compare the selected seat height with the underside of your counter or table, including its apron, and allow space to sit and move. A chair needs 18 to 24 inches behind it to come out from the table, so mark that on the floor before you count. Lose that room and the line backs into the seating.

Care takes a minute at close. Wipe vinyl seats with mild soapy water at close and dry them; bleach and harsh solvents harm the cover. Fabric seats need a vacuum now and then and a quick blot on every spill. Check the cleaning code first.

Set Wood Grain Finish or Powder Coat Finish as the metal finish, Padded Vinyl Seat or Padded Fabric Seat as the seat type, and Padded Vinyl Back or Padded Fabric Back as the upholstered back before it goes in the basket. Fill those in and the remaining choices appear. Press Save to shop plan to hold this piece in a plan for the shop, or put it straight in the basket. Upholstered seats are made to your choices, so they take longer than the plain version.