Metal Armchair, Arvell

Put the Metal Armchair, Arvell where the regulars sit: it is an upholstered back armchair meant for hotel bars, fine dining rooms, and lounges. Listed for the shop interior, not the pavement. Metal is the frame material, in black. For the seat, vinyl. Worth knowing at the counter: a load rating of 500 lb, 29 lb to carry from the back room, an arm each side, and a padded backrest for long sits.

Measure your floor against 25 1/4" W x 23 3/4" D x 31 1/2" H. The listed seat height is 18.5 inches. Compare the selected seat height with the underside of your counter or table, including its apron, and allow space to sit and move. A chair needs 18 to 24 inches behind it to come out from the table, so mark that on the floor before you count. Lose that room and the line backs into the seating.

Fold this into the closing routine. Mild soapy water cleans vinyl; towel it dry before the chairs go up for the mop. Check painted metal for chips when you stack at close, and seal them before rust starts.

Pick your pick of metal finish: Matte Black, Dark Walnut, or Natural and a 5-strong standard vinyl list that starts with Regal Black, London Tan, and Gunmetal to match the shop. Press Save to shop plan to hold this piece in a plan for the shop, or put it straight in the basket. Upholstered seats are made to your choices, so they take longer than the plain version.