Clear Coat Curvy Chair, Metal

Put the Clear Coat Curvy Chair, Metal where the regulars sit: it is an upholstered back chair meant for hotel restaurants, fine dining rooms, and country clubs. Its listing says indoor use, so it stays inside the shop. Metal is the frame material, in clear coat. For the seat, vinyl. On the spec sheet you also find a weight rating of 500 lb, 13 lb to carry from the back room, and a back with padding.

The listed size is 17 1/2" W x 19 3/4" D x 32 1/4" H, so mark that out before you count. The listed seat height is 18.75 inches. Compare the selected seat height with the underside of your counter or table, including its apron, and allow space to sit and move. Chairs wear unevenly in a shop, and the ones nearest the till go first. Hold back one per twenty seats so you can swap one out without closing a table.

Fold this into the closing routine. Wipe vinyl seats with mild soapy water at close and dry them; bleach and harsh solvents harm the cover. Check painted metal for chips when you stack at close, and seal them before rust starts.

Pick Black, Buckskin, Gunmetal, or London Tan as the vinyl upholstery to match the shop. Press Save to shop plan to hold this piece in a plan for the shop, or put it straight in the basket. Pick the upholstery early: it is made to your selection and adds to the lead time.