Black Metal Nico Chair

The Black Metal Nico Chair goes on the shop list as an upholstered back chair for fine dining rooms, hotel restaurants, and private dining rooms. Listed for the shop interior, not the pavement. The frame is made of metal and comes in black. For the seat, vinyl. Worth knowing at the counter: a load rating of 500 lb, 11 lb to carry from the back room, and a back with padding.

The listed size is 16 3/4" W x 20 1/2" D x 31 3/4" H, so mark that out before you count. The listed seat height is 19.5 inches. Compare the selected seat height with the underside of your counter or table, including its apron, and allow space to sit and move. A chair needs 18 to 24 inches behind it to come out from the table, so mark that on the floor before you count. Lose that room and the line backs into the seating.

Fold this into the closing routine. Wipe vinyl seats with mild soapy water at close and dry them; bleach and harsh solvents harm the cover. Check painted metal for chips when you stack at close, and seal them before rust starts.

Set configuration, one of Black, Buckskin, Gunmetal, or London Tan before it goes in the basket. Press Save to shop plan to hold this piece in a plan for the shop, or put it straight in the basket.